Combination Fibre Channel/Gigabit Ethernet Sfp Transceivers; Cwdm Combination Fibre Channel / Gigabit Ethernet Sfp Transceivers - Cisco MDS 9216 Hardware Installation Manual

Supported SFP Transceivers
Send documentation comments to mdsfeedback-doc@cisco.com.

Combination Fibre Channel/Gigabit Ethernet SFP Transceivers

CWDM Combination Fibre Channel / Gigabit Ethernet SFP
Transceivers
Cisco MDS 9216 Switch Hardware Installation Guide
1-22
Cisco's Fibre Channel SFP transceivers have LC connectors and comply with
1 Gbps / 2 Gbps Fibre Channel standards as defined in FC-PI 10.0 2.
Transmission ranges for 2 Gbps are as follows:
Long wavelength: Up to 10 km on 9 micron single mode fiber
•
Short wavelength: Up to 300 m on 50 micron multi-mode fiber
•
• Short wavelength: Up to 150 m on 62.5 micron multi-mode fiber
For detailed transceiver specifications, see
Specifications".
Cisco's Combination Fibre Channel/Gigabit Ethernet SFP transceivers are
available in short wavelength (SWL) or long wavelength (LWL) versions. Both
of these versions are 1 Gbps / 2 Gbps capable.
Cisco's Combination SFP transceivers have LC connectors and comply with
1 Gbps / 2 Gbps Fibre Channel as defined in FC-PI 10.0 2.
Transmission ranges are as follows:
Long wavelength: Up to 10 km on 9 micron single mode fiber
•
• Short wavelength: Up to 300 m on 50 micron multi-mode fiber
• Short wavelength: Up to 150 m on 62.5 micron multi-mode fiber
For detailed transceiver specifications, see
Specifications".
All Fibre Channel and Gigabit Ethernet ports in the Cisco MDS 9216 support
CWDM SFP transceivers.
The Cisco CWDM SFP transceivers have LC connectors and support both Gigabit
Ethernet and Fibre Channel (1 Gbps / 2 Gbps). They match the wavelength plan
of Cisco CWDM GBICs and Cisco CWDM OADMs.
Chapter 1 Product Overview
Appendix C, "Cable and Port
Appendix C, "Cable and Port
78-16165-01