Chapter 1
Product Overview
Send documentation comments to mdsfeedback-doc@cisco.com.
Interface Module LEDs
78-16165-01
Table 1-2
describes the LEDs provided on the Cisco MDS 9216 interface module.
Table 1-2
LEDs on the Cisco MDS 9216 Interface Module
LED
Status
Status
Green
Orange The module is booting or running diagnostics
Red
System
Green
Orange The power supply failed or the power supply fan
Red
MGMT 10/100
Green
Ethernet Link
Off
LED
MGMT 10/100
Green
Ethernet
Off
Activity LED
Description
All diagnostics pass. The module is operational
(normal initialization sequence).
(normal initialization sequence).
An over temperature condition occurred (a minor
threshold was exceeded during environmental
monitoring).
The diagnostic test failed. The module is not
operational because a fault occurred during the
initialization sequence.
An over temperature condition occurred (a major
threshold was exceeded during environmental
monitoring).
All chassis environmental monitors are reporting OK.
failed.
Incompatible power supplies are installed.
The redundant clock failed.
The temperature of the supervisor module major
threshold was exceeded.
Link is up.
No link.
Traffic is flowing through port.
No link or no traffic.
Cisco MDS 9216 Switch Hardware Installation Guide
Interface Module
1-9