Processor; Supervisor Module Leds - Cisco MDS 9216 Hardware Installation Manual

Chapter 1 Product Overview
Send documentation comments to mdsfeedback-doc@cisco.com.

Processor

Supervisor Module LEDs

78-16165-01
The supervisor module has a Pentium III class processor, 1 GB of DRAM, and has
an internal CompactFlash card that provides 256 MB of storage for software
images.
Table 1-1 describes the LEDs for the Cisco MDS 9216 supervisor module.
Table 1-1 LEDs for the Cisco MDS 9216 Fixed Supervisor Module with
Integrated 16-Port Switching Module
LED Status Description
Status Green All diagnostics pass. The module is operational (normal
initialization sequence).
Orange The module is booting or running diagnostics (normal
initialization sequence).
An over temperature condition occurred (a minor threshold
was exceeded during environmental monitoring).
Red The diagnostic test failed. The module is not operational
because a fault occurred during the initialization sequence.
An over temperature condition occurred (a major threshold
was exceeded during environmental monitoring).
Speed On 2 Gbps mode.
Off 1 Gbps mode.
Link Solid green Link is up.
Flashing Link is up (beacon used to identify port).
green
Solid Link is disabled by software.
orange
Flashing A fault condition exists.
orange
Off No link.
Cisco MDS 9216 Switch Hardware Installation Guide
Supervisor Module
1-7