Connecting The Power Supplies - Cisco MDS 9216 Hardware Installation Manual

Starting Up the Switch
Send documentation comments to mdsfeedback-doc@cisco.com.

Connecting the Power Supplies

Step 1
Step 2
Cisco MDS 9216 Switch Hardware Installation Guide
2-18
The Cisco MDS 9216 Switch supports 845 Watt AC power supplies, shown in
Figure 2-8.
Figure 2-8 Power Supply for the Cisco MDS 9216 Switch
2
PWR-845-AC
1
5
100-240V 12-5A
50/60 Hz
4
1 Power switch
2 Power cable retainer
3 Power supply LEDs
To provide power to an AC power supply, follow these steps:
Plug the power cable into the power supply and tighten the screw on the power
cable retainer to ensure the cable cannot be pulled out.
Connect the other end of the power cable to a power source.
Chapter 2
3
INPUT OK
FAN OK
OUTPUT FAIL
ALL FASTENERS MUST BE FULLY ENGAGED
PRIOR TO OPERATING OF POWER SUPPLY
4 AC power connection
5 Captive screw
Installing the Cisco MDS 9216 Switch
78-16165-01