Installing The Chassis In The Rack - Cisco MDS 9216 Hardware Installation Manual

Chapter 2 Installing the Cisco MDS 9216 Switch
Send documentation comments to mdsfeedback-doc@cisco.com.
Note
Step 1
Step 2

Installing the Chassis in the Rack

Caution
78-16165-01
The switch is thoroughly inspected before shipment. If any damage occurred
during transportation or any items are missing, contact your customer
representative immediately.
Inspect the equipment as follows:
Compare the shipment to the equipment list provided by your customer service
representative and verify that you have received all items, including the
following:
• Print documentation and CD-ROMs
Grounding lug kit
•
• Rack mount kit
ESD wrist strap
•
Cables and connectors
•
• Any optional items ordered
Check for damage and report any discrepancies or damage to your customer
service representative. Have the following information ready:
Invoice number of shipper (see packing slip)
•
Model and serial number of the damaged unit
•
• Description of damage
Effect of damage on the installation
•
This section describes how to install the Cisco MDS 9216 Switch in a rack using
the rack mount kit provided in the accessory kit.
If the rack is on wheels, ensure that the brakes are engaged or that the rack is
otherwise stabilized.
Cisco MDS 9216 Switch Hardware Installation Guide
Installing the Chassis in the Rack
2-7