Environmental And Electrical Specifications For Cisco Ge/Fc Sfp Transceivers; Cisco Cwdm Sfp Transceivers - Cisco MDS 9216 Hardware Installation Manual

SFP Transceiver Specifications
Send documentation comments to mdsfeedback-doc@cisco.com.

Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers

Cisco CWDM SFP Transceivers

Cisco MDS 9216 Switch Hardware Installation Guide
C-12
Table C-12 provides the maximum environmental and electrical ratings for Cisco
GE/FC SFP transceivers.
Table C-12 Maximum Environmental and Electrical Ratings for Cisco GE/FC
SFP Transceivers
Parameter
Storage Temperature
Case Temperature
Relative Humidity
Module Supply Voltage
Notes:
Absolute Maximum Ratings are those values beyond which damage to the
1.
device may occur if these limits are exceeded for other than a short period of
time. See Reliability Data Sheet for specific reliability performance.
Between Absolute Maximum Ratings and the Recommended Operating
2.
Conditions functional performance is not intended, device reliability is not
implied, and damage to the device may occur over an extended period of time.
Table C-13 lists the CWDM SFP transceivers available through Cisco.
Table C-13 Cisco CWDM SFP Transceivers
Description
Cisco CWDM SFP 1470 nm; Gigabit Ethernet and 1Gbps/2Gbps FC Gray
Cisco CWDM SFP 1490 nm; Gigabit Ethernet and 1Gbps/2Gbps FC Violet
Cisco CWDM SFP 1510 nm; Gigabit Ethernet and 1Gbps/2Gbps FC Blue
Cisco CWDM SFP 1530 nm; Gigabit Ethernet and 1Gbps/2Gbps FC Green
Cisco CWDM SFP 1550 nm; Gigabit Ethernet and 1Gbps/2Gbps FC Yellow
Appendix C
Symbol Min. Max.
T -40 100
S
T 0 85
C
RH 5 95
V T,R 3.1 3.5
CC
Cable and Port Specifications
Unit Notes
°C See note 1.
°C See notes 1, 2.
% See note 1.
V See note 1.
Color
78-16165-01