Cisco MDS 9216 Hardware Installation Manual page 60

Installing the Chassis in the Rack
Send documentation comments to mdsfeedback-doc@cisco.com.
Note
Figure 2-2
1 C bracket
Cisco MDS 9216 Switch Hardware Installation Guide
2-10
Ensure the C brackets are oriented so they block the fewest airflow holes
on the chassis; the holes should be slightly closer to the bottom of the
brackets and the text on the back of the brackets should be right side up.
Installing C Brackets onto the Cisco MDS 9216 Switch
M D
S
9 2
1 6
2 Screws, M4
Chapter 2 Installing the Cisco MDS 9216 Switch
1 2
78-16165-01