Console Port; Console Port Pinouts - Cisco MDS 9216 Hardware Installation Manual

Console Port

Send documentation comments to mdsfeedback-doc@cisco.com.
Note
Console Port

Console Port Pinouts

Cisco MDS 9216 Switch Hardware Installation Guide
C-2
If you purchased this product through a Cisco reseller, contact the reseller directly
for technical support. If you purchased this product directly from Cisco, contact
Cisco Technical Support at this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.
The console port is an asynchronous RS-232 serial port with an RJ-45 connector.
You can use the RJ-45 to RJ-45 rollover cable and the RJ-45 to DB-25 female
DTE adapter or the RJ-45 to DB-9 female DTE adapter to connect the console
port to a computer running terminal emulation software.
Table C-1 lists the pinouts for the console port on the Cisco MDS 9216 Switch.
Table C-1 Console Port Pinout
Pin Signal
1
1 RTS
2 DTR
3 TxD
4 GND
5 GND
6 RxD
7 DSR
8 CTS
1. Pin 1 is connected internally to pin 8.
Appendix C Cable and Port Specifications
78-16165-01