Table of Contents
Advertisement
to each area. This printing method is used with
applications that allow the user to accurately specify
colour components.
Requirements
For simultaneous full colour and foil colour printing
you will need the following.
1.
Media
a
Press Paper or High Grade Paper, etc. can be
used as with normal colour printing.
2.
Ink cartridges
The following ink cartridges can be used for
simultaneous full colour and foil colour printing.
a
Gold Foil ink cartridge
b
Silver Foil ink cartridge
c
Process Cyan ink cartridge
d
Process Magenta ink cartridge
e
Process Yellow ink cartridge
f
Process Black ink cartridge
g
Finish II ink cartridge
58
Note:
Only a maximum of nine ink cartridges can be
installed in the printer at any one time. Cyan,
Magenta, Yellow and Black cartridges must always be
installed. The Foil and Finish II cartridges are
optional.
Prepare the image to be printed
Create the data you want to print, then set the image
areas to be printed in foil colours to colours that
correspond to the foil colours you want to use. For the
colours (and colour components) that correspond to
each foil colour, refer to the tables on page 5-12.
Note:
There are a small range of colour component values
that will be interpreted by the printer as indicating foil
colours. Because of this, photographs and other data
with many different colours may have areas that match
the foil colour designations and print only partially in
foil colour. When printing images that contain data
such as photographs, it is best to print full colour plus
foil colour using Overlay mode
In simultaneous full colour plus foil colour printing,
indicate the gold and silver foil colours by selecting the
corresponding colour component. For characters of 32
User's Guide
Advertisement
Table of Contents
Troubleshooting
