Setting Up The Printer Driver For Printing - Oki Thermal A3+ Colour Desktop Printer DP-7000 User Manual

Setting up the printer driver for printing

1. In the application you want to print from, select
from the
Page Setup
dialogue box.
Setup
2. Make any necessary changes to the settings in the
dialogue box
Page Setup
3. Set the to
Media
, or
Grade Paper
and the
Grade Paper
loaded in the printer. When using a different type
or size of paper, change the setup accordingly.
4. Click to close the
OK
5. In the Print dialogue box click the
check box.
Colours
6. In the
Spot Colours Setting
the Use
Spot Colour(s)
7. Select
Metallics & CMYK Inks
pop-up menu.
Using
8. After the settings have been completed, click
9. In the Print dialogue box click
10. In
Select Ink Cartridge(s)
among those installed in the printer are displayed.
52
menu to open the
File
,
Press Paper-Matte/Art
Cardboard (Thick Paper) High
to match the paper
Size
dialogue box.
Page Setup
Use Spot
dialogue box click
radio button.
from the
.
OK
enabled ink cartridges
Click the radio button(s) of the ink cartridge(s) to
be used.
11. When the correct ink cartridge is selected, click
Page
to start printing.
OK
Note 1:
Even though you have set the colour of an area to your
desired colour in your application, the area will not be
High
printed if the corresponding ink cartridge has not been
selected.
Note 2:
If a selected foil colour ink cartridge is not installed, a
warning message will be displayed. In this case,
exchange ink cartridges as indicated in the message.
12. When you complete the setup, click
the dialog box.
13. Click
printing.
Print
.
OK
in the Print dialog box to start
Print
to close
OK
User's Guide