Table of Contents
Advertisement
Note 1:
Since all of the colour and grayscale data is binarized
in multi colour printing, gradation cannot be
represented.
Note 2:
White portions of data (R=G=B=100%) are not
printed.
In multi foil colour printing, indicate foil colours by
selecting colours in the application that most closely
resemble the foil colours. Try to select colours that
resemble the colours listed in the tables below. In
applications that do not have many colour choices, such
as word processors, closely related colours can be used.
Application colour used to indicate the foil
Foil Colour
Gold Foil
Yellow (or yellow/orange)
Silver Foil
Grey
Black (normal)
Normal black (R=G=B=0 or C=M=Y=0, K=100)
•
Colour compositions using RGB settings (n/255)
Foil Colour
Gold Foil
225
Silver Foil
189
56
colour
R
G
B
160
0
193
197
•
Colour compositions using RGB settings (n/
100%)
Foil Colour
Gold Foil
88
Silver Foil
74
Note:
For instructions on changing colour component
settings within an application, refer to your software
application
User
manual.
application, a foil colour may not print correctly even
though the colour settings were properly set in the
application. Check the Preview window before
printing, and try increasing or decreasing the setting to
get the correct foil colour to print.
Install ink cartridges
Install the gold and silver foil colour ink cartridges plus
the undercoat ink cartridges listed in Requirements.
The ink cartridges can be installed in any order.
Load the paper in your printer
Use manual feed mode for cardboard (thick paper). For
Press Paper or High Grade Paper, you can use
automatic feed mode.
R
G
B
63
0
76
77
Depending
on
User's Guide
the
Advertisement
Table of Contents
Troubleshooting
