Installing Ink Cartridges - Oki Thermal A3+ Colour Desktop Printer DP-7000 User Manual

Caution 1
The manufacturer only recommends printing with the
cartridge-paper combinations listed in Table 1.
Caution 2
Printing with an inappropriate ink cartridge-paper
combination can damage the cartridge ribbon.
Caution 3
Printing outside the printable paper area can damage the
cartridge ribbon. Always print within the printable area.
See 'Printable Area' in Specifications and Settings.

Installing ink cartridges

Install ink cartridges by following the steps below.
Caution
Dropping an ink cartridge could damage the cartridge and
result in lower quality printing. If you drop a cartridge you
should replace it with a new cartridge.
20
1. The cartridge has a stopper (1) to prevent slack in
the ribbon (see below). Remove this stopper from
the ink cartridge.
1
2. Insert a pencil from the side marked "B" and turn
the pencil slowly to take up any slack in the
ribbon (1).
3. Open the front cover by pushing the front cover
release button to release the internal lock. Gently
lower the front cover with your hand.
4. Hold the ink cartridge with your thumb and index
finger so that the side with the letter "B" and the
manufacturer's logo faces upward.
User's Guide