Load The Transparency Film Or Transfer Film; Setting Up The Printer Driver For Printing - Oki Thermal A3+ Colour Desktop Printer DP-7000 User Manual

Load the transparency film or transfer
film
1. Fan the sheets before loading them into the
printer to ensure they do not stick together.
2. Load the sheets into the manual feed slot in the
correct orientation. The cut corner at the end of
the sheet should be first located into the left side
of the printer (when viewed from the front).
3. To prevent jams remove the sheets immediately
after printing.

Setting up the printer driver for printing

1. In the application you want to print from, select
from the
Page Setup
dialogue box.
Setup
2. Make any necessary changes to the settings in the
dialogue box
Page Setup
3. Set the to
Media
and the
Film Size
the printer. When using a different type or size of
paper, change the setup accordingly.
Note:
When Transparency Film
up Menu, is automatically set.
A3+
62
menu to open the
File
or
Transparency Film Transfer
to match the paper loaded in
is selected from Media
4. Click
5. In the Print dialogue box select
Photographs
menu.
6. Click the
7. Make colour matching selections as required. For
selection information see "Setting up colour
matching option".
8. After the settings have been completed, click
9. When you have completed your settings, click
Print
Note 1:
Shrinking transparency film
Page
When printing is complete, use a heater/hairdryer to
shrink the film.
Please read the detailed explanation in the notes that
come with the transparency film.
Note 2 :
Using the transfer film
When printing is complete use an iron to transter the
image to the media. For additional information please
read the instructions that come with the transfer film.
pop-
to close the
OK Page Setup
, or
Graphics & Text
button in the
Image Print
in the Print dialogue box to start printing.
dialogue box.
,
Automatic
from the
Type
dialogue box.
.
OK
User's Guide