Oki Thermal A3+ Colour Desktop Printer DP-7000 User Manual page 29

Thermal a3+ colour desktop printer
Table of Contents

Advertisement

5.
Insert the left end of the ink cartridge into the ink
cartridge holder, while pushing the left side latch
of the holder slightly to the left along with the
cartridge.
Note
The printer carriage located inside the printer can
select and pick up the necessary ink cartridge from any
holder. You can place up to 9 cartridges of the same
colour in the holders to reduce the need to change ink
cartridges.
Caution
The ink cartridges may be put in any holder but DO NOT
put ink cartridges directly into the carriage. Doing so may
result in damage to the printer.
Chapter 2 - Initial Setup
6.
Push down the right side of the ink cartridge.
Make sure that the ink cartridge is securely
locked into the holder, and that there is no slack
in the ribbon.
7.
Place the second ink cartridge on top of the ink
cartridge already installed. Gently push down the
centre of the ink cartridges.
English
21

Advertisement

Table of Contents
loading

Table of Contents