Requirements; Prepare The Image To Be Printed - Oki Thermal A3+ Colour Desktop Printer DP-7000 User Manual

correct colour to each area. This printing method is
used with applications that allow the user to accurately
specify colour components.

Requirements

For simultaneous full colour and metallic colour
printing you will need the following.
1. Media
a Press Paper or High Grade Paper, etc. can be
used as with normal colour printing.
2. Ink cartridges
The following ink cartridges can be used for
simultaneous full colour and foil colour printing.
a Metallic Magenta ink cartridge
b Metallic Cyan ink cartridge
c Metallic Gold ink cartridge
d Metallic Silver ink cartridge
e Process Cyan ink cartridge
f Process Magenta ink cartridge
g Process Yellow ink cartridge
h Process Black ink cartridge
50
i Finish II ink cartridge
Note:
Only a maximum of nine ink cartridges can be
installed in the printer at any one time. Cyan,
Magenta, Yellow and Black cartridges must always be
installed. The Foil and Finish II cartridges are
optional.

Prepare the image to be printed

Create the data you want to print, then set the image
areas to be printed in metallic colours to colours that
correspond to the metallic colours you want to use. For
the colours (and colour components) that correspond to
each metallic colour, refer to the table below.
Note:
There are a small range of colour component values
that will be interpreted by the printer as indicating
metallic colours. Because of this, photographs and
other data with many different colours may have areas
that match the metallic colour designations and print
only partially in foil colour. When printing images that
contain data such as photographs, it is best to print full
colour plus metallic colour using Overlay mode
In simultaneous full colour plus metallic colour
printing, indicate the Red, Blue, gold and silver metallic
User's Guide