Table of Contents
Advertisement
7.
Select
Single Ink (No Halftone)
from the
(Halftone)
8.
After the settings have been completed, click
9.
In the
dialogue box click
Print
10. In
Select Ink Cartridge(s)
among those installed in the printer are displayed.
Click the radio button(s) of the ink cartridge(s) to
be used.
11. When the correct ink cartridge is selected, click
to start printing.
OK
Note:
If bidirectional communication is not possible, all the
usable ink cartridges are displayed.
12. When you complete the setup, click
the dialog box.
13. Click
in the Print dialog box to start
Print
printing.
Multi metallic colour printing
Use the steps outlined below for foil colour printing
using four metallic colour ink cartridges. By
associating each foil colour with a colour (or colour
component) in your application, you can print with four
Chapter 4 - Specialised Printing Operations
or
Single Ink
pop-up menu.
Print Using
OK
.
OK
enabled ink cartridges
to close
OK
s
metallic colours or four metallic colours plus black.
You can use this method with most applications that
support colour.
.
Requirements
The media and ink cartridge requirements for multi
metallic colour printing are the same as in the single
metallic colour printing.
Prepare the image to be printed
Use any application to create the image or document
you want to print. Then set the colours corresponding to
each metallic colour you want to use. For example, set
the parts of the image that you want to print in gold foil
to yellow and those of the image that you want to print
in silver foil to grey. When you want to print metallic
colours and black simultaneously, you must also
specify the area you want to print in black.
Note 1:
Since all of the colour and grayscale data is binarized
in multi colour printing, gradation cannot be
represented.
Note 2:
White portions of data (R=G=B=100%) are not
printed.
English
47
Advertisement
Table of Contents
Troubleshooting
