1.1 Overview
This manual describes how to configure and how to use the printer LAN used by the PT340-341 printer.
Read this manual thoroughly to ensure you use the product correctly and safely.
When using a Windows printer driver via the LAN, you need to configure the LAN information and
create a original TCP/IP ports for this printer. You can configure these settings easily by using the "Printer
LAN Settings Tool".
1.2 System Requirements
Printer settings
• LAN:
<Guide> The factory default value is "Enable".
Refer to the instruction manual for the printer for details on how to configure this setting.
Host hardware
(1) Personal computers equipped with the following interfaces and running a supported operating
systems (OSs).
LAN interface
(2) The ".NET Framework 2.0" or higher is required in order to use this tool.
If it is not installed, obtain and install the ".NET Framework 2.0" from the Microsoft website.
Copyright (C) 2013 Oki Data Corporation
1 Introduction
Enable
Printer LAN Online Manual 1.1.0.0
2 of 34