Install Ink Cartridges; Load The Paper In Your Printer; Setting Up The Printer Driver For Printing - Oki Thermal A3+ Colour Desktop Printer DP-7000 User Manual

points or more, select the following approximate
colours.
Application colour used to indicate the foil
Foil Colour
Gold Foil Yellow (or yellow/orange)
Silver Foil Grey
• Colour compositions using RGB settings (n/255)
Foil Colour R
Gold Foil 225
Silver Foil 189
• Colour compositions using RGB settings (n/
100%)
Foil Colour
Gold Foil 88
Silver Foil 74
Note 1:
Some applications make internal adjustment to
produce the displayed colour components. In such
cases, the colour components cannot be restricted and
therefore foil colours cannot be used. When using such
an application, use the Overlay mode.
Note 2:
There are a small range of colour component values
which are close to a foil colour. These colours will be
Chapter 4 - Specialised Printing Operations
colour
G B
160 0
193 197
R G B
63 0
76 77
interpreted by the printer as indicating foil colours and
will be printed in the respective foil colour.

Install ink cartridges

Install all the ink cartridges specified in Requirements
into the ink cartridge holders. Simultaneous full colour
plus foil colour printing is possible by exchanging ink
cartridges when the corresponding message is
displayed.

Load the paper in your printer

The method used for loading paper depends on the
paper type used.

Setting up the printer driver for printing

1. In the application you want to print from, select
from the
Page Setup
dialogue box.
Setup
2. Make any necessary changes to the settings in the
dialogue box
Page Setup
3. Set the to
Media
, or
Grade Paper
and the
Grade Paper
loaded in the printer. When using a different type
or size of paper, change the setup accordingly.
English
menu to open the
File
,
Press Paper-Matte/Art
Cardboard (Thick Paper) High
to match the paper
Size
Page
High
59