Oki Thermal A3+ Colour Desktop Printer DP-7000 User Manual page 94

Ink and paper
1 How should I use opaque white ink?
Opaque white ink can be used as follows:
Opaque white ink can be used for white base
printing. It is possible to do a white base print
which is necessary for the dummy design for film
packaging.
2 Is it OK to print using the opaque white ink on top
of a full colour image?
Print with Opaque white ink for full-colour
printing.
3 For full colour printing and glossy finishing, may I
use any type of paper?
We suggest using High Grade Paper, Press Paper
or VPhoto Film for full colour printing. Using
other types of paper can produce a poor image.
Connection method
1 Can I connect multiple DP printers to a single
computer?
If different SCSI device numbers are used,
multiple printers can be connected to a single
Macintosh. Of course, simultaneous printing is
not possible.
86
2 Can I connect a single DP printer to multiple
computers?
No, the printer is not designed for this.
Other operational problems
1 Is this printer compatible with PostScript?
The DP-7000 printer uses QuickDraw. It is not
compatible with PostScript.
However, it is possible to use DP-7000 printer for
PostScript printing by using the DP-7000 RIP
(software RIP).
2 EPS files cannot be output clearly.
Since EPS files are data files for PostScript
printers, images at 72 dpi may be output from
QuickDraw depending on the application.
3 Are enlargements and reductions possible?
Set either the enlargement or the reduction rate in
the
Reduce or Enlarge
dialogue box. This value may be specified
between 25 and 400.
4 The preview doesn't change even though I change
the reduction or enlargement in the Page Setup
dialogue box.
setting in the
Page Setup
User's Guide