Table of Contents
Advertisement
Performing Mask Tests
The mask test function monitors waveform changes by comparing the
waveform to a predefined mask.
The Mask Test function is not available in the X-Y horizontal timebase mode.
N O T E
To access the Mask Test menu:
1 Press [Utility].
2 In the Utilities menu, press Mask Test.
To enable/disable mask tests
1 In the Mask Test menu ([Utility] > Mask Test), press Enable Test to toggle
To select the source channel for mask tests
1 In the Mask Test menu ([Utility] > Mask Test), press Source.
2 Continue pressing the Source softkey or turn the
Agilent 1000B Series Oscilloscopes User's Guide
between OFF and ON.
select the desired input channel.
Oscilloscope Utility Settings
entry knob to
6
135
Advertisement
Table of Contents
