Strip Module: B-Sa904-H-Qm-R - Toshiba B-SA4T Series Product Description

3. OPTIONAL KIT
3.1 Cutter Module: B-SA204-QM/B-SA204-QM-R/B-SA204P-QM-R
Item
Cutting method
Media to be cut
Media thickness
Rated voltage
Cutter life
Operating environment
Temperature
Humidity
Storage environment
Temperature
Humidity
Media feed speed
Cutting time
Cut cycle
Dimension
Weight
Safety device
Removal of jammed
media
3.2 Strip Module: B-SA904-H-QM-R/B-SA904P-H-QM-R
Item
Peel off method
Media to be stripped
Backing paper width
Label width
Label length
Label pitch
Gap length
Effective print length
Media thickness
Operating environment
Temperature
Humidity
Storage environment
Temperature
Humidity
Strip speed
Dimension
Weight
NOTE: Labels of which length exceeds 76.2 mm may stick to the media outlet after it is stripped from the
backing paper.
Guillotine cutter
Thermal paper, normal paper, label stock
80 to 290µm
DC24V ±5%
80 to 160mm-thick paper: 1000000 cuts
160 to 290mm-thick paper: 500000 cuts
0 to 40°C
25 to 85% RH (No condensation)
-10 to 50°C
5 to 90% RH (No condensation)
2"/sec., 4"/sec., 6"/sec.
0.5 sec. or less/cut
2 sec. or more/cycle
184mm (W) x 212mm (H) x 87mm (D)
Approximate1500 g
Power supply is stopped when the interlock switch detects an open of
the cutter front cover.
In case of a cutter error due to a media jam, rotate the cutter motor shaft
by hand to remove the jammed media.
Backing paper feed rollers draw the backing paper.
Thermal label, normal label
25.4mm to 114 mm
21.4 to 110 mm
13 to 997 mm
15 to 999 mm
2 to 5 mm
11 to 995 mm
130 to 170µm
0 to 40°C
25 to 85% RH (No condensation)
-40 to 60°C
10 to 90% RH (No condensation)
2 ips, 4 ips, 6 ips
146mm (W) x 201 mm (H) x 50mm (D) (Front cover is not included.)
Approximate 1000 g
3- 2

3.2 Strip Module: B-SA904-H-QM-R

Specification
Specification
EO10-33016A