2. MAJOR UNIT REPLACEMENT
2.7
Replacing the Peel Off Unit and Peel Off Sensor
1)
Refer to item no. 7 in Section 2.1 Removing the Function Unit.
2)
Press the plastic lever to the side and lift the Peel Off Unit Assembly up. Detach the connector.
3)
Push up the Peel Off Sensor to detach it from the Peel Off Unit.
4)
Replace the Peel Off Unit with a new one, then perform reassembly in the reverse order of removal
2.8 Replacing the WLAN Board Assembly
Push to unlock
Pull the FFC Cable
Peel Off Sensor
2-9
SPTM-0325