Before Using The Peel-Off Unit - Toshiba B-FP2D-GH30-QM-S Owner's Manual

9. Before using the Peel-off Unit

When issuing labels in the peel-off mode, pull out the peel-off roller before loading a media roll.
Push the top cover open button [1] to open the top cover [2].
1
Push the lock lever [3] in the direction of the arrow. The peel-off unit [4] comes out.
2
Refer to "Loading the Media Roll" on the previous page and set the media roll [5].
3
Peel off one sheet of the label and dispose of it.
Move the paper guide lever [6] toward the operation panel side. Adjust the paper guides [7] to the
4
media roll width.
20 9. Before using the Peel-off Unit
[ 1 ]
[ 4 ]
[ 5 ]
[ 7 ]
[ 2 ]
[ 3 ]
[ 6 ]