GCA70250
7. OTHER FEATURES
7.1 Line Groups
Some systems have telephone lines arranged into line groups that
may be accessed for outside calling instead of selecting an individual
line button. The installer can use this feature to reserve certain lines
for certain clusters of stations for a tenant-service arrangement.
• If your system has line groups, access them as follows:
1. PRESS INTERCOM.
2. DIAL desired line group access code,
Line Group
1
2 through 11
12 through 16
* If your system installer has reassigned the line group access codes, write
them here for future reference.
3. LISTEN for outside dial tone.
4. DIAL desired number.
5. LIFT handset to talk.
7.2 Automatic Redial
With this feature, the system automatically redials a busy or unan-
swered outside call. Once you activate automatic redial, the station
selects the line, automatically dials the number, and waits for a
response. (It dials and then waits 30 seconds for an answer.) If the
called station does not answer, the redialing station disconnects, waits
one minute, and then repeats the sequence. The station will repeat
this procedure for approximately 10 minutes.
August, 03
Line Group Access Codes
Default Code
9
80 through 89
60 through 64
Comdial
Attendant Manual
Active Code *
77