Call Forward Outside System (Cfos) - Comdial DXP, DXP Plus, FX Attendant Manual

Advanced Call Handling
4.4 Call Forward Outside System
(CFOS)
The Call Forward Outside System (CFOS)* feature allows you to
forward incoming or transferred line calls or intercom calls to tele-
phone numbers that are outside the system. The CFOS feature for-
wards calls over any available outbound lines or line groups and does
not use any conference circuits. Since CFOS involves outbound calls,
those calls are subject to all line access, toll restriction, and automatic
route selection restrictions normally imposed on your calls.
You activate or deactivate CFOS by dialing a feature code, pressing a
preprogrammed button or pressing an interactive button on an LCD
speakerphone. Once you activate CFOS, you select the outbound line
or line group in any of the normal line selections methods. You also
designate the forward destination by dialing the number or pressing a
speed dial button. (If you do not make a line and destination choice,
the system uses the most recently used selections.)
The Call Forward Outside System (CFOS) feature also includes for-
warding outside of the system for direct and transferred personal
intercom calls. Also, the feature provides ring no–answer (RNA)
capability to the CFOS of both line and personal intercom calls. With
this RNA capability, the system rings a station a programmed number
of rings and then forwards the call outside the system based upon the
programmed CFOS setting.
• To activate CFOS with your LCD speakerphone,
1. SELECT OPTIONS.
2. SELECT NEXT until CFWD
appears.
3. SELECT CFWD.
4. SELECT SET.
5. SELECT NEXT until CFOS
appears.
6. SELECT CFOS.
50 Comdial
Call Forwarding
NoANS CFOS
Selecting CFOS
August, 03
NEXT