Comdial DXP, DXP Plus, FX Attendant Manual page 79

GCA70250
5. CHOOSE your speed dial route from the following list:
• PRESS line button to select outside
line,
• DIAL 00 to select prime line or last
line used,
• DIAL 01 to 16 to select line
group,
• PRESS INTERCOM button or dial
8 to select intercom.
Note: You may need a pause between numbers to compensate for
differences in response time between your system and the host sys-
tem (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host sys-
tem that needs a hookflash to access a feature, press TAP to store
a hookflash, then continue dialing.
6. DIAL number (up to 16-digits long).
7. SELECT SAVE to store the number.
8. REPEAT previous steps until all
numbers are stored, OR SELECT
EXIT.
9. PRESS SPEAKER to end.
August, 03 Comdial
Attendant Manual
Preselect
Selecting Line or Intercom
Dial Number
SAVE BKSP
Dialing a Speed Number
EXIT
EXIT
69