Comdial DXP, DXP Plus, FX Attendant Manual page 50

Making Calls
• To activate call waiting when you hear a busy signal,
1. 1.
1. DIAL *6 (called party hears tone).
2. WAIT on line for reply.
3. Called party can place the current call on hold or disconnect from the
call to answer your call-waiting tone, or choose to ignore your call-
waiting tone and continue current conversation.
• To cancel call waiting,
1. PRESS INTERCOM AND DIAL #6.
2. HANG UP OR PRESS SPEAKER to end.
• To answer a call-waiting tone if you receive one while
on a call,
1. HEAR short tone burst in receiver.
2. PLACE current call on hold, OR complete call AND HANG UP
(waiting call will ring at your telephone).
3. LIFT handset to answer call.
40
BUSY
To Wait For
Callback...
...Select
CALLBACK
and Disconnect
When idle,
your call
is connected.
Busy
Station
Camping On Options
Comdial
Your
Station
To Send Call
Waiting Tone...
...Dial 6 and
✳
Wait For Reply
Busy station
hears tone
and may respond
When any activity
or ignore.
occurs at station,
Idle
Station
NO ANSWER
To Wait For
Callback...
...Select CAMP
and Disconnect
your call is
connected.
August, 03