Paging - Comdial DXP, DXP Plus, FX Attendant Manual

GCA70250

3.8 Paging

Your system provides an all-call or a zone page feature that you
access by dialing special codes. This arrangement sounds your voice
announcement through the telephone speakers. All-call sounds the
announcement through all telephones, while zone paging sounds the
announcement only through those telephones located in a specific
area. Check with your system administrator to determine the type of
paging and access method you should use. If your day-to-day oper-
ation requires that you send many paging announcements, you can
program a special all-call/zone paging button to give quick access to
the feature. See the programming section of this user's guide for
details.
Your installer can arrange your system with an external paging unit
that you access by pressing a line button or by dialing a special code.
This unit sounds the voice announcement over an external speaker
unit. Check with your system administrator for specific information
on how to operate with such an arrangement.
• To send a paging announcement,
1. LIFT handset.
2. PRESS INTERCOM.
3. DIAL 70 through 77 for zones 1–8.
Note: Zone 1 (code 70) provides an all-call function in the
default mode.
4. MAKE announcement.
5. REMAIN on line if awaiting a reply (known as a Meet-Me page), OR
HANG UP handset.
At times other telephone users may page you with instructions to
meet them on line. This is known as a Meet-Me page. You can go to
the nearest telephone, dial a code, and be in contact with the paging
party.
August, 03 Comdial
Attendant Manual
41