Call Forwarding - Comdial DXP, DXP Plus, FX Attendant Manual

Advanced Call Handling

4.3 Call Forwarding

You can forward the calls that normally ring at your telephone to
another telephone for answering. Call forwarding provides several
options that can be programmed by you locally at your station. For
example, you can forward just the prime line and intercom calls or
forward every call that rings at your station.
Also, you can control whether the calls forward immediately or after
a preprogrammed number of rings (this is true of busy calls as well,
which ring in a subdued manner) that is set by the installer. When the
telephone is set to ring several times before forwarding, you have a
chance to end the current call before the incoming call is forwarded.
For each internal call received while call forward is enabled, your
telephone sounds a ring reminder (short tone burst) to remind you that
your calls are being forwarded.
• To forward your calls,
1. SELECT OPTIONS.
2. SELECT NEXT until the CFWD
option appears.
3. SELECT CFWD.
4. SELECT SET.
5. Choose one of the following call for-
warding options,
• SELECT PERS to forward
prime line and intercom calls.
• SELECT ALL to forward all
calls.
• SELECT NEXT AND No ANS
to forward calls that ring at your station but receive no
answer after a preprogrammed number of rings (THEN
PRESS PERS to forward your prime line and intercom calls,
OR PRESS ALL to forward all calls that ring with no answer
at your telephone).
48 Comdial
Call Forwarding
SET CLR
Selecting Call Forwarding
Call Forwarding
PERS ALL
Call Forwarding Options
EXIT
NEXT
August, 03