Executive Override - Comdial DXP, DXP Plus, FX Attendant Manual

GCA70250
• To identify the station that occupies a busy line,
1. PRESS DSS/BLF button for busy line.
2. READ your display for intercom number of station that is busy on
line.
• To identify the line that a busy station occupies,
1. PRESS DSS/BLF button for busy station.
2. READ your display for the busy station's line number.

3.10 Executive Override

Overriding A Call Or A Do Not Disturb Condition At
Another Telephone
You can override a call in progress or a Do Not Disturb condition at
another telephone if the system installer has enabled the executive
override feature at your telephone. (If the feature is not enabled, an
error tone sounds and screen options remains displayed.)Conditions
for executive override are as follows:
• Calling station has class of service that enables busy override.
• Calling station is switched to override voice path.
• Called party may respond and will be heard by calling station
and outside party.
When the calling party dials the override code, the called party
receives several tone bursts.
The executive advisory tone allows installers to configure the system
to provide an audible tone whenever you activate the executive
override feature. installers can select this tone as either a one time
tone or as a periodic reoccurring tone. If installers choose a reoc-
curring tone, they must also select the time interval between the reoc-
curring tones.
August, 03 Comdial
Attendant Manual
43