Comdial DXP, DXP Plus, FX Attendant Manual page 74

Nonverbal Messaging
Installers can take programming action to enable or disable the stutter
intercom dial tone received at a station to indicate a message waiting.
You can program this item as a station COS parameter.
• To turn on the message-waiting light (and a broken dial
tone) at another station that is idle or busy,
1. PRESS INTERCOM.
2. DIAL *3.
3. DIAL extension number OR PRESS DSS/BLF button of station to be
alerted. The message-waiting light of called station will flash.
• You can also turn on the message-waiting light and broken
dial tone at another station when that station is busy,
1. HEAR the busy tone AND REMAIN
on the line.
2. SELECT MSG.
3. HANG UP.
• To turn off the message waiting
light at a busy or idle station,
1. PRESS INTERCOM.
2. DIAL #3.
3. DIAL extension number OR PRESS DSS/BLF button of station that
was alerted. The message-waiting light of called station will turn off.
• To turn off the message-waiting light during message-
delivering conversation,
—PRESS INTERCOM once if off-hook, twice if on-hook.
64 Comdial
Calling J Smith
CALLBK
Leaving a LCD Message
August, 03
MSG