Comdial DXP, DXP Plus, FX Attendant Manual page 125

GCA70250
5. DIAL 10 to 43 to choose message type (see Table Of Messages on
page 99 for message type list).
Note: As soon as you perform the next step, the two-minute timer
starts running. Be ready to speak your message or press the PLAY
button on the tape recorder as soon as you dial the replicate
choice.
6. DIAL 1 to 9 to choose number of times to replicate message.
7. SPEAK your message (OR PRESS the PLAY button on the tape
recorder when you're using pre-recorded messages).
8. DIAL # to end message.
9. LISTEN as system automatically plays the message for verification at
your attendant station.
10. DIAL # to stop verification playback.
11. REPEAT procedure until you've recorded all messages.
• DIAL 10 to 43 to choose next message type.
• DIAL 1 to 9 to choose replicate quantity (timer starts).
• SPEAK your message (or press the PLAY button), on the tape
recorder).
• PRESS # to end message.
• HEAR automatic playback of message.
• To play a previously recorded DVA message,
1. PRESS INTERCOM.
2. DIAL *#0*06.
3. DIAL 2.
4. DIAL 10 to 43 to choose message type (see Table Of Messages on
page 99 for message type list).
5. LISTEN as system automatically plays the message for verification at
your attendant station.
6. DIAL # to stop verification playback.
7. DIAL 10 to 43 to choose next message type to hear.
August, 03 Comdial
Attendant Manual
115