Superimpose Screen - Panasonic AJ-HPM200 Operating Instructions Manual

Control signals, time code and other information are indicated
by abbreviations.
Display monitor
TCR
Abbreviation
Abbreviations:
CTL Relative location from the beginning
TCR Recorded time code data
TCR. Time code data recorded in the VAUX area
UBR Recorded user bit data
UBR. User bit data recorded in the VAUX area
TCG Time code data of the time code generator
UBG User bit data of the time code generator
◆ NOTE:
• [T*R] or [U*R] appears when card data could not be properly read.
Display characters
Use setup menu No. 009 (CHARA TYPE) to change the
background of display characters in the superimposed
display.
TCR
Display monitor

Superimpose Screen

TCR
Display monitor
Display position
Use setup menu No. 007 (CHARA H-POS) and No. 008
(CHARA V-POS) to change the position of characters in the
superimposed display.
TCR
Display monitor
Operating mode
Use setup menu No. 006 (DISPLAY SEL) to indicate deck
operating mode.
TCR
STOP
Display monitor
TCR
Display monitor
Deck operating mode
Setup: Superimpose Screen
189