Panasonic AJ-HPM200 Operating Instructions Manual page 182

Item
FR SUPER
No. DISP.
A03 MENU LOCK
A04 PF1 ASSIGN
A05 PF2 ASSIGN
A06 PF3 ASSIGN
A07 PF4 ASSIGN
A10 CARD READ
A11 CARD WRITE
A12 CARD FORMAT
182
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 OFF Sets/releases the user file (USER2 - USER 5) lock mode.
0: Releases the lock. (File data can be changed.)
0001 ON
1: Lock is engaged. (File data cannot be changed.)
NOTE:
• USER 1 cannot be locked.
• Files can be loaded from the SD memory card even if they are
locked. The status after load operation depends on the setting
defined by the loaded data.
Registers a setup menu item in the PF1 button.
Registers a setup menu item in the PF2 button.
Registers a setup menu item in the PF3 button.
Registers a setup menu item in the PF4 button.
Select files from the four SD memory card files to load into the menu.
This function is available only to USER 1-5 (SYSTEM) and USER 1-5.
Select one of the four files on an SD memory card to write a menu
setting.
The write function is available only to USER 1-5 (SYSTEM).
Titles can be added to the files and the files can be edited.
Formats SD memory cards.
Settings and brief function description Remarks
Setting available
for USER2 to
USER5 only
Setting available
for USER1 only
Setting available
for USER1 only
Setting available
for USER1 only