Attaching Text Memos And Shot Marks; Attaching Text Memos - Panasonic AJ-HPM200 Operating Instructions Manual

Attaching Text Memos and Shot Marks

A text memo can be attached in a clip to mark a specific
location. The user can attach shot marks to distinguish clips
from each other. This function is not available on cards where
the write protect switch has been set to PROTECT.

Attaching Text Memos

Use the NEXT and PREV buttons to locate attached text
memos during video playback.
➝Refer to "Setup menu No. 103 (SEEK SEL)" (page 166).
FULL/FINE
MONITOR
SELECT
METER SELECT
CH 1-4 CH 5-8
INPUT SELECT
VIDEO AUDIO
CH 1 CH 2 CH 3
REC
VAR
UNITY
THUMBNAIL PLAYLIST VIDEO
EDIT MODE
SET LAST X
MULTI DELETE
SEL
MENU
EXIT
CANCEL/PF DIAG
SLOT CLIP
OPERATION
1
Press the TEXT MEMO button during recording,
playback or when thumbnails are displayed.
• Press this button during recording and playback where
you want to attach a text memo.
• Pressing this button in the thumbnail screen adds a text
memo at the thumbnail clip location (normally at the
beginning).
◆ NOTE:
• Up to 100 text memos can be attached in one clip.
• Pressing the TEXT MEMO button during playback may
temporarily halt playback. This is normal and not a malfunction.
• Text memos are not recorded during LOOP REC or VFR ON
recording.
Playing back from text memo location
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
56
Clip Management: Attaching Text Memos and Shot Marks
SOURCE SELECT STILL/
PLAY PAUSE REW
COUNTER
RESET
REVIEW PREV
1 CLIP PLAY
NEW
TC PRESET
PROP
CH 4 TEXT
INT
TCG
MEMO
REGEN
PRESET
EXT
MARKER
A1 A2 GO TO
A3 A4 A.DUB
MODE
TRIM
SLOT SELECT
IN ENTRY OUT
ALL CLIP
CLIP LIST
SHIFT
PF1 PF2 PF3
PF4
1
2
Press the MENU button and choose [THUMBNAIL] –
[TEXT MEMO CLIPS] from the thumbnail menu.
The thumbnails of clips with text memos appear at the top
of the LCD monitor. Information on the selected clip text
memo appears in the lower half of the LCD monitor.
FF
NEXT
Thumbnail Blue indicates selected
display number of text memo
clips and white indicates
total number of text
memo clips.
◆ NOTE:
• In the following instances, the thumbnail in the row below at the text
memo location may be replaced with
appears.
• An AVC-Intra clip with a different SYSTEM FREQ setting.
3
Place the cursor on the clip (with a text memo) you
want play back and press the SET button.
The cursor moves to the lower half of the LCD monitor.
Indicates still images
included with the text
memos.
when a text memo clip
The cursor moves.