Table of Contents
Advertisement
LCD Panel
1
1.
Level meter
Indicates the level of audio signals for CH1, CH2, CH3
and CH4.
The input signal level of audio signals is indicated
during recording and when EE is selected. During
playback the meter indicates output signal levels.
Use the METER selector button to switch the audio
level display to FULL mode or FINE mode. Use the
setup menu No. 776 (REF LEVEL) to change the
reference level.
FINE mode
dB
dB
4
3
2
-12
1
0
-20
-1
-2
-3
-30
-4
-40
L R
2.
Counter display
This function shows the counter and time codes.
It displays CTL (relative position from the beginning),
TC (read time code) and UB (user bit of the read time
code).
3.
Format display
Indicates the set record format and the format of video
recorded on an inserted P2 card.
28
Introduction: Control Reference Guide
dB
dB
0
4
3
2
-12
1
0
-20
-1
-2
-3
-30
-4
-40
-
L R
L R
CTL
TC
UB
FULL mode
0
Reference level
L R
5
dB
dB
0
4
3
2
-12
1
0
U
-20
-1
-2
1080i720p
-3
-30
DVCPRO
-4
-40
-
HD
50
L R
L R
2
4.
TV system display
Indicates the selected TV system. Use the SYSTEM
setting in setup menu No. 25 (SYSTEM FREQ) to
switch between 59.94 Hz, 50 Hz or other settings.
59.94: Lights when a 59.94 Hz system frequency is selected.
50:
◆ NOTE:
• When a frequency other than 59.94 Hz and 50 Hz is
selected, also the SYSTEM indicator goes off.
5.
U lamp
In the EE mode, this lamp lights when an input signal
contains UMID information.
Lights during playback when the recording contains
UMID information.
SYSTEM
4
59.9450
AVC-I
3
Lights when a 50 Hz system frequency is selected.
Advertisement
Table of Contents
