Table of Contents
Advertisement
Item
Message
CANNOT OPERATE:
UNMATCH INSERT
POINTS
CANNOT OPERATE:
UNMATCH
OUTPOINT
CAPTURE
INCOMPLETED
DIFFERENT
FORMAT!
DIFFERENT
PLAYLIST VERSION!
DIFFERENT SYSTEM
FREQUENCY!
DURATION
LIMITATION!
ILLEGAL FILE!
LACK OF REC
Playlist
CAPACITY!
NO CARD!
NO FILE!
NO SPACE!
NOT AVAILABLE
FORMAT!
NOT SELECTED!
NUMBER OF EVENT
LIMITATION!
NUMBER OF FILE
LIMITATION!
READ ONLY
PLAYLIST VERSION!
R-OUT POINT IS NOT
AVAILABLE IN
INSERT MODE
WRITE PROTECTED! The specified card is write protected.
202
For Long and Trouble-Free Operation: Error Messages
Description
Since there is a track with a non-matching
destination points, operation is not possible.
Since there is a track with a non-matching source
OUT point, operation is not possible.
A capture from an external player failed to
capture the entire clip, but registered what was
captured.
The playlist being edited and the event and clip
selected for importing are in a different playlist
format (codec or frame rate).
The playlist contains files in different versions.
Some files have a different system frequency.
The selected process cannot be performed
because playlist duration exceeds 24 hours.
The playlist is not in a format that can be loaded
into the unit.
The card selected for Edit Copy does not have
enough capacity.
The specified card does not exist.
The specified file does not exist.
There is not enough space on the card.
Cannot edit data in the current format.
No clip is selected.
The number of events on a track has reached the
upper limit.
The number of playlist files has reached the
upper limit.
The playlist file is opened as read only because it
is in a different version.
An insert edit cannot use a recorder OUT point.
Measure
Match up the destination points of all tracks.
Match up the OUT points of all tracks.
When OUT points are displaced due to intermittent
time codes, for example, trimming could be used to
revise.
Use clips in a matching playlist format.
Playlist files in a different version cannot be
imported.
Use only files with the same system frequency.
Delete data to reduce the duration to less than 24
hours to process.
Use a playlist file in a format that can be loaded into
the unit.
Insert a card with sufficient capacity.
Insert the card before attempting to process it.
Use SAVE AS to save or insert a normally operating
card.
Use a compatible playlist format.
Select the clip in the player thumbnail screen.
The upper limit of the number of events on each
track is 100. Operate within this limit.
One card can store up to 999 playlist files. Delete
files no longer needed or use a new card.
Playlists created on the AJ-SPD850, AJ-HPM100,
AJ-HPM110 or AJ-HPS1500 can only be opened as
read only files. To edit such files on this unit save
them out.
Select some point other than the recorder OUT point
in editing.
Insert write-enabled media.
Advertisement
Table of Contents
