Table of Contents
Advertisement
Preparation
Using the menu screen
Menu setting by button operation
1
Press the MENU button
2
Press the
/
to select.
3
Place the cursor on [EXIT] and press the SET button to finish the menu setting.
∫ About page switching
It is not possible to select the
If the cursor is on the top item, press the
switch the page.
∫ To adjust the numerical value by button operation
In the menu for setting the numerical value, after selecting the numerical display part, press the
buttons to adjust.
(For example, when adjusting the brightness with [LCD SET])
1
Place the cursor on the numerical display A and press the SET
button to select.
2
Press the
/
≥ When the SET button is pressed, the adjusted value is set.
≥ There is also a menu to adjust by pressing the
.
/
/
buttons to move the cursor to the menu, and press the SET button
/
/
/
icon with button operation.
button, or if the cursor is on the bottom item, press the
buttons to adjust the value.
/
buttons.
- 34 -
button to
/
/
/
Advertisement
Table of Contents
