Panasonic AJ-HPM200 Operating Instructions Manual page 149

Memory card portable recorder/player
Hide thumbs Also See for AJ-HPM200:
Table of Contents

Advertisement

Uploading metadata (META DATA)
In addition to uploading metadata, use this function to perform
the operations listed below.
Perform any preparations that may be required.
• Loading metadata
Insert the SD memory card with the recorded metadata in
the unit. (Use AVCCAM Viewer or P2 Viewer to create load
data.)
• Selecting whether to record metadata on an SD memory
card
• Initializing metadata on the unit
• Displaying metadata on the unit
1
Press the MODE button to enter AVCHD mode.
2
Press the MENU button.
3
Press the up and down (4/5) cursor buttons to select
[META DATA] and press the SET button.
4
Use the cursor buttons to select an item and press
the SET button.
CARD READ:
Loads metadata stored on an SD memory card into this
unit. Select whether or not you want to load the data
([YES]/[NO]) and press the SET button. This unit can show
up to 10 metadata items on an SD memory card in order
from the most recently created item.
File names of loaded metadata that use characters other
than alphanumeric characters are replaced by "*".
RECORD:
Determines whether or not metadata loaded into the unit
be recorded on an SD memory card.
Select whether to record or not ([ON]/[OFF]) and press the
SET button.
The factory default setting is [OFF].
USER CLIP NAME:
You can select how to record the USER CLIP NAME. For
details, refer to "Selecting method for recording USER
CLIP NAME" (this page).
CLIP COUNT RESET:
Resets the counter to 1.
Select whether to reset or not ([YES]/[NO]) and press the
SET button.
META DATA PROP:
Displays metadata loaded into the unit.
META INITIAL SET:
Initializes metadata loaded into the unit.
Select whether or not you want to initialize the data ([YES]/
[NO]) and press the SET button.
5
Press the MENU button to exit the menu mode.
Selecting method for recording USER CLIP
NAME
Press the MENU button and choose [META DATA] - [USER
CLIP NAME] and select method for recording USER CLIP
NAME.
There are two types: TYPE1 and TYPE2.
AVCHD Recording and Playback: Using an Optional AVCHD Board
149

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj-hpm200pAj-hpm200e

Table of Contents