Table of Contents
Advertisement
2)
Hard disk information
SERIAL:
MODEL:
SELECTED
PART.:
SELECTED
PART. No.:
NUMBER (NO.): Partition no. (1 - )
DATE /TIME:
VERIFY:
NAME:
SIZE/USED/
FREE CAP.:
◆ NOTE:
• Press the EXIT button to return to the hard disk explorer screen.
• Use the TRIM +/– buttons to move to thumbnail displays on
previous and subsequent partitions without returning to the hard
disk explorer screen.
• Press the ENTRY button to select a displayed partition as a
target.
• Change the thumbnail screen display as necessary. These
changes are performed in the same way as when using P2
cards.
➝ Refer to "Changing Thumbnail Display" (page 50).
Thumbnail display (FAT)
1
Open the hard disk explorer screen.
A list of folders appears.
2
Use the cursor buttons to select the folder whose
thumbnails you want to view and press the SET
button.
Thumbnails of the clips in the folder will now appear.
◆ NOTE:
• When a volume is selected, pressing the MULTI SEL (SHIFT +
SET) button will display the thumbnails for all the selected
folders.
122
Connections: Using This Unit With a Hard Disk
P2 card serial number
P2 card model name
A check mark
appears for the
selected partition.
This indication appears only when
multiple partitions are selected and
a list of numbers of selected
partitions is displayed.
Date and time of partition
recording
Verify setting and result during
recording
ON: FINISHED Verification was
successful
ON: FAILED
Verification failed
"- -" is displayed
on P2 store.
OFF:
No verification
was performed
User assigned partition name
Total hard disk capacity/used
capacity/remaining capacity
SET
1)
1)
Clip information
Displays clip properties.
➝Refer to "Thumbnail and Clip Management" (page
46).
2)
Hard disk information
SELECTED
A check mark
PART.:
selected folder.
SELECTED
This indication appears only when
PART. No.:
multiple folders are selected and a
list of numbers of selected folders
is displayed.
NUMBER(NO.): Folder number (1 - )
DATE/TIME:
Folder creation date
FOLDER:
Folder name
SIZE/FREE
Capacity and remaining capacity
CAP.:
of hard disk space
*1: Date created is not shown for root.
◆ NOTE:
• Press the EXIT button to return to the hard disk explorer screen.
• Use the TRIM +/– buttons to move to thumbnail displays on
previous and subsequent folders without returning to the hard
disk explorer screen.
• Press the ENTRY button to select a displayed folder as a target.
• There is a limit of 1000 clips and clips that exceed this limit will
not be displayed.
EXIT
2)
appears for the
*1
Advertisement
Table of Contents
