Panasonic AJ-HPM200 Operating Instructions Manual page 78

DUR:
IN and the OUT points on the player
when the IN and OUT buttons are
simultaneously pressed.
◆ NOTE:
• When either one of the IN and OUT points
When the player is a P2 card, this
P2
:
appears before the left end of the
player time code display.
When the player is an external device,
Ext
:
this appears before the left end of the
player time code display.
When the player is a hard disk, this
HDD
:
appears before the left end of the
player time code display.
2.
Player thumbnail status indication
Indicates the following player thumbnail status: [ALL],
[SAME FORMAT], [SELECTED], [MARKER],
[TEXTMEMO] and [SLOTn].
3.
Player thumbnail display
Displays player thumbnails.
Displayed clip number, indicators and other
information are the same as those displayed on the
thumbnail display .
➝Refer to "Thumbnail Screen Names and Functions"
(page 47).
4.
Player time bar indication
The total width of the time bar indicates the total length
of the player (total duration). The background color of
the time bar is light gray when the player is operating
and dark gray when the recorder is operating.
Yellow bar Indicates the rough location of current
( | ): playback.
◆ NOTE:
• When the player is an external device, the
78
Editing: Playlist Function
Indicates the duration between the set
has not been set, this function indicates
the duration between the set IN or OUT
point and the current location.
yellow bar ( | ) indicating playback
location does not appear.
Green Indicates the rough location of the IN
triangle (a): point when a player IN point is set.
◆ NOTE:
• When the player is an external device, the
green triangle appears at 1/3 of the time
bar regardless of IN point location.
• When player thumbnail status is set to
SELECTED CLIPS or other status and the
clip with the set IN point does not belong
to these clips, a green bar ( | ) appears to
the left of the time bar.
Red triangle Indicates the rough location of the OUT
(b): point when a player OUT point is set.
◆ NOTE:
• When the player is an external device, the
red triangle appears at a location 2/3 of the
time bar regardless of OUT point location.
• When player thumbnail status is set to
SELECTED CLIPS or other status and the
clip with the set OUT point does not
belong to these clips, a red bar ( | )
appears to the right of the time bar.
5.
Player playback screen display
Displays video of player playback.
Recorder screen
The recorder screen shows video of events registered in the
playlist.
1
2
3
1.
Recorder time code indication
Indicates the time code of the recorder playback
location.
• Displayed information
TCR: Indicates recorder time code.
UBR: Indicates recorder user bits.
CTL: Indicates the position relative to
recorder start position.
IN: Indicates the time code of the IN point
set on the recorder when the IN button
is pressed.