Recording Clips Containing Metadata - Panasonic AJ-HPM200 Operating Instructions Manual

5
Press EXIT to exit the metadata confirmation dialog.
Deleting metadata
Use the following procedure to delete metadata stored in this unit.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to select [META DATA] –
[INITIALIZE] and press the SET button.
4
Select [YES] in the confirmation dialog and press the
SET button.
This deletes the metadata.
5
Press the MENU button to end processing.
Recording Clips Containing
Metadata
This procedure attaches the loaded metadata to clip that is
recorded.
1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [META DATA] –
[RECORD] and press the SET button.
4
Select [ON] and press the SET button.
This setting records the loaded metadata simultaneous
with video recording. The USER CLIP NAME is attached to
metadata as specified by the recording method.
5
Press the MENU button to end setup.
6
Record video on this unit.
◆ NOTE:
• When [OFF] is selected in step 4, no metadata is attached to the
clip.
Clip Management: Attaching Metadata to Clips
67