Table of Contents
Advertisement
FULL/FINE
MONITOR
SELECT
METER SELECT
CH 1-4 CH 5-8
INPUT SELECT
VIDEO AUDIO
CH 1
CH 2
CH 3
CH 4
REC
VAR
UNITY
THUMBNAIL
PLAYLIST
VIDEO
A1
1
EDIT MODE
A3
TRIM
SET
LAST X
MULTI
DELETE
SLOT SELECT
SEL
IN
ENTRY
MENU
EXIT
CANCEL/PF
DIAG
SLOT CLIP
CLIP LIST
OPERATION
PF1
PF2
2
1
Open the thumbnail screen.
2
Use the cursor buttons to select the clip you want to
play back.
3
Press the PLAY
button
Playback starts from the clip the cursor is on.
After the clip at the cursor location has been played,
subsequent clips are played back in order. When the last
clip has been played, the thumbnail screen appears.
◆ NOTE:
• There is no need to select a clip (that is when the thumbnail
appears inside a blue frame) to play it back.
• The thumbnail display settings can be changed to play back
only selected clips or play back only clips that contain text
memos.
• Pressing the STILL
button instead of the PLAY button shows
a still of the first frame in the clip.
• A clip whose clip number is red cannot be played back.
Playing Back Clips
SOURCE SELECT
STILL/
REW
FF
PLAY
PAUSE
COUNTER
RESET
REVIEW
PREV
NEXT
1 CLIP PLAY
NEW
TC PRESET
PROP
TEXT
INT
TCG
MEMO
REGEN
PRESET
EXT
MARKER
A2
GO TO
A4
A.DUB
MODE
OUT
ALL CLIP
SHIFT
PF3
PF4
3
• Pressing the REW
button instead of the PLAY button results
in rewind playback, while pressing the FF
forward playback.
• Pressing the STOP
button during clip playback, stops
playback and the thumbnail screen appears.
• When playback stops, the cursor moves to the clip played prior
to stopping.
• Video and audio playback may be disrupted between clips of
different formats (DVCPRO HD, DVCPRO50, DVCPRO/DV,
AVC-Intra50, AVC-Intra100). This is normal and not indicative of
a malfunction.
• Changing the thumbnail screen to text memo display makes it
possible to start play back from text memo location.
➝ Refer to "Playing back from text memo location" (page 56).
◆ NOTE:
• A menu allows you to select that playback be resumed from
the location where thumbnail playback was stopped when
the cursor has not been moved.
PLAYBACK
ON:
RESUME:
OFF
• A menu allows you to specify whether or not to return to the
thumbnail screen after stopping playback started from the
thumbnail screen.
STOP MODE:
STAY
RETURN
• XX indicates factory default settings.
Playing Back Single Clips
To play back the clip at the cursor location, hold down the
SHIFT button and press the PLAY
◆ NOTE:
• The thumbnail screen appears when playback stops at the
end of the clip or when the STOP
The cursor then moves to the next clip.
• All buttons other than the STOP
during single clip playback.
• Single clip playback starts from the beginning of the clip.
• PLAYBACK RESUME and STOP MODE are disabled for
playback of single clips.
Clip Management: Playing Back Clips
results in fast
Store stop position
Play back from
beginning
Stay in playback mode
Return to thumbnail
mode
button.
button is pressed.
button are not available
55
Advertisement
Table of Contents
