Formatting P2 Cards - Panasonic AJ-HPM200 Operating Instructions Manual

1
Open the thumbnail screen.
2
Press the MENU button.
3
Use the cursor buttons to choose [OPERATION] –
[FORMAT] – [SLOTn] (the number of the P2 card slot
containing the card to format) and press the SET
button.
4
Select [YES] and press the SET button.
The card is now formatted.
◆ NOTE:
• To cancel formatting, select [NO] and press the SET button.
• Check that no important data remains on a card before
formatting since data erased by formatting cannot be
recovered.
5
Press OK (SET button) when the completion
message appears.
◆ NOTE:
• Repeat the procedures in steps 3 to 5 to format P2 cards in other
P2 card slots or SD memory cards.
6
Press the MENU button to end processing.
70
Clip Management: Formatting P2 Cards

Formatting P2 Cards