Table of Contents
Advertisement
Item
FR
SUPER
No.
DISP.
691
UMID GEN
692
UMID POS
693
GAMMA SEL
176
Setup: Item Settings
Setting
FR
SUPER
No.
DISP.
0000
INT
Specifies the generation method of UMID information that is recorded when setup menu
0001
EXT
No. 690 (UMID REC) is set to ON.
0: Newly created UMID information is always recorded.
1: Records UMID data superimposed on the input signal.
Newly created UMID information is recorded when not superimposed on an input
signal.
0000
BLANK
Specifies the line that superimposes UMID data.
0001
12L
NOTE:
:
:
• You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502
0006
17L
VITCPOS-2.
:
:
• Holding down the STILL button and pressing the RESET button will not restore the
0008
19L
factory defaults.
• UMID data is output before recorded VANC data. To output VANC data, set UMID
POS to a line other than that which superimposed the data or select "BLANK."
• During playback of DVCPRO HD native clip, UMID becomes NO-INFO.
0000
OFF
Selects gamma correction.
0: No gamma correction
0001
GAMMA1
1: Corrects video shot by Varicam or in the
0002
GAMMA2
FILM REC mode on an AJ-HPX3000 to film-
0003
GAMMA3
quality video. (Equivalent to TELECINE 5 on
the AJ-GBX27HD Gamma Corrector)
2: Corrects video shot by Varicam or in the
FILM REC mode on an AJ-HPX3000 to film-
quality video. (Equivalent to TELECINE 6 on
the AJ-GBX27HD Gamma Corrector)
3: Converts video shot by Varicam or in the
FILM REC mode on an AJ-HPX3000 by
applying a Cineon curve to produce video appropriate for film recording.
NOTE:
• This setting is available during playback.
• Selecting something other than OFF superimposes the text GAMMA on the screen.
• Turning the power off cancels the GAMMA setting.
• This item has no effect during 1394 output.
Settings and brief function description
1023
768
512
256
TELECINE5
TELECINE6
Cineon
256
512
768
1023
LUMINANCE
Advertisement
Table of Contents
