Table of Contents
Advertisement
INTERFACE
This menu specifies the ID data that will be returned to the controller.
Item
FR
SUPER
No.
DISP.
0000
0001
0002
202
ID SEL
TIME CODE
This menu sets the time code.
Item
FR
SUPER
No.
DISP.
0000
0001
500
VITC BLANK
When set to 59.94 Hz,
0000
0006
0010
501
VITC POS-1
When set to 50 Hz,
0000
0004
0015
Setting
FR
SUPER
No.
DISP.
OTHER
Specifies the ID data that will be returned to the controller.
DVCPRO
0: OTHER
1: DVCPRO
ORIG
2: ORIG
NOTE:
• Select [OTHER] for ID data for a VTR other than a DVCPRO.
• Select [ORIG] only when specific Panasonic controllers (such as AJ-A850, separately
sold accessory) are connected.
• When [ORIG] is selected, a STOP command transferred via 9P remote during
thumbnail playback results in STILL (SHTL +0.0). The STANDBY OFF command
engages the STOP mode and resumes thumbnail playback.
Setting
FR
SUPER
No.
DISP.
BLANK
59.94Hz
THRU
Specifies whether or not a VITC signal will be output at the positions selected in setup
menu No. 501 (VITC POS-1) and No. 502 (VITC POS-2) during playback.
0: VITC signals are not output.
1: VITC signals are output.
NOTE:
• This setting is available only during analog composite output and SD SDI output.
• In EE mode, the input signal is output with the VITC signal.
59.94Hz
29.97 Hz
Specifies the position where the VITC signal will be inserted.
10L
NOTE:
|
|
• You cannot select the same line as in setup menu No. 502 (VITC POS-2).
16L
• This setting is available only during analog composite output and SD SDI output.
|
|
20L
25 Hz
7L
|
|
11L
|
|
22L
• XX indicates factory default settings.
Settings and brief function description
• XX indicates factory default settings.
Settings and brief function description
50Hz
29.97Hz
25Hz
50Hz
29.97Hz
25Hz
only
only
Setup: Item Settings
169
Advertisement
Table of Contents
