Panasonic AJ-HPM200 Operating Instructions Manual page 170

Item
FR SUPER
No. DISP.
502 VITC POS-2
504 RUN MODE
505 TCG REGEN
507 EXT TC SEL
508 BINARY GP
509 PHASE CORR
510 TCG CF FLAG
170
Setup: Item Settings
Setting
FR SUPER
No. DISP.
When set to 59.94 Hz,
59.94Hz
29.97 Hz
Specifies the position where the VITC signal will be inserted.
0000 10L
NOTE:
| |
• You cannot select the same line as in setup menu No. 501 (VITC POS-1).
0008 18L
• This setting is available only during analog composite output and SD SDI output.
| |
0010 20L
When set to 50 Hz,
25 Hz
0000 7L
| |
0006 13L
| |
0015 22L
0000 REC Specifies an operating mode that advances the internal time code generator.
0: The internal time code generator is advanced only during recording.
0001 FREE
1: When the power is on, the internal time code generator is advanced regardless of
operating mode.
NOTE:
When setup menu No. 040 (VFR REC) is set to ON, the time code advances only during
recording even when FREE is selected.
0000 TC&UB Specifies the signal to regenerate when the time code generator (TCG) is in the REGEN
mode.
0001 TC
0: Regenerates both the time code and the user bit
0002 UB
1: Regenerates only the time code
2: Regenerates only the user bit
0000 EXT_L
59.94Hz
0001 SLTC
Specifies the time code used when an external time code is used.
0002 SVITC
0: LTC of the TIME CODE IN connector
1: LTC data attached to serial signal input to HD SDI IN
2: VITC data attached to serial signal input to HD SDI IN
NOTE:
When SLTC and SVITC are set, the VITC in the input video signal is used when an
analog composite or SD SDI input signal is selected. When 1394 is selected as the
input signal, the IEEE 1394 digital input signal time code is used regardless of this
setting.
0000 000 Specifies user bit usage in time code generated by the TCG.
0: NOT SPECIFIED (character set not specified)
0001 001
1: ISO CHARACTER (8-bit character set complying with ISO646 and ISO2022)
0002 010
2: UNASSIGNED 1 (undefined)
0003 011
3: UNASSIGNED 2 (undefined)
0004 100
4: UNASSIGNED 3 (undefined)
0005 101
5: PAGE/LINE
0006 110
6: UNASSIGNED 4 (undefined)
0007 111
7: UNASSIGNED 5 (undefined)
0000 OFF
59.94Hz
0001 ON
Specifies whether or not LTC output from the TIME CODE OUT connector should be
phase controlled.
0: No phase control
1: Phase controlled
0000 OFF
59.94Hz
0001 ON
Sets the TCG CF flag.
0: OFF
1: ON
Settings and brief function description
50Hz 29.97Hz 25Hz
50Hz 23.98Hz 24Hz
50Hz 23.98Hz 24Hz
50Hz 29.97Hz 25Hz
only
only
29.97Hz 25Hz
29.97Hz 25Hz only
60-25Hz only