Panasonic AJ-HPM200 Operating Instructions Manual page 164

Item
FR SUPER
No. DISP.
041 LOOP REC
050 P.ON GUI
051 GUI OUTPUT
069 CLOCK SET
Subscreen
00 YEAR
01 MONTH
02 DAY
03 HOUR
04 MINUTE
05 TIME ZONE
164
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 OFF Specifies whether or not to make loop recording.
➝For details, refer to "LOOP REC Function" (page 39).
0001 ON
0: Does not make loop recording
1: Makes loop recording
NOTE:
Turning the power off cancels this setting. The unit will then start up using the default
value (OFF) next time it is powered up.
0000 OFF Specifies whether or not the thumbnail screen or playlist screen appears when the power
THUMB is turned on.
0001
0: Does not display thumbnail screen and playlist screen.
PLYLST
0002
1: Displays the thumbnail screen.
2: Displays the playlist screen.
0000 LCD
59.94Hz
0001 LCD&V
60-25Hz
0002 ALL
Specifies whether the GUI screen will be output to VIDEO OUT or SDI OUT connector.
0: Not output (displayed only on LCD monitor)
1: Output to VIDEO OUT connector
2: Output to both VIDEO OUT and SDI OUT connectors
NOTE:
• When 23.98 or 59-23 is selected in setup menu No. 25 (SYSTEM FREQ), the refresh
of the GUI screen output to SDI OUT may seem unnatural. Also, when the GUI screen
switches to the video screen (and vice versa), the output signal may be distorted.
• Some characters on the GUI screen output to VIDEO OUT may not be clear.
Sets the internal clock.
NOTE:
Press the STOP or SET button to open the subscreen for setting the time. Change the
date in the subscreen and press the SET button to set the clock date. To exit the
subscreen without setting a date, press the STOP or EXIT button again.
0000 2000 Sets the year.
| |
0037 2037
0001 JAN Sets the month.
| |
NOTE:
0012 DEC
Setting a nonexistent day for February, April, June, September and November will
automatically set the equivalent day in the following month.
0001 1 Sets the day.
| |
NOTE:
0031 31
Setting a nonexistent day for February, April, June, September and November will
automatically set the first day in the following month.
0000 0 Sets the hour.
| | Set the hour according to the 24-hour clock.
0023 23
0000 0 Sets the minute.
| |
0059 59
0000 00:00 Sets the time difference from the world standard time. Use the table below for reference
in setting the time.
0001 +00:30
| |
0018 +09:00
| |
0027 –12:00
| |
0050 –00:30
Settings and brief function description
50Hz 23.98Hz 29.97Hz
only
59-23Hz 25Hz