Table of Contents
Advertisement
Item
FR
SUPER
No.
DISP.
0000
0001
511
DF MODE
0000
0001
512
TC OUT REF
0000
0001
513
VITC OUT
0000
514
HD EMBD VITC
0001
0000
515
HD EMBD LTC
0001
0000
0001
518
VITC GEN
0000
0001
519
UB OUT SEL
Definition of terms:
SBC (Sub Code Data) area:
VAUX (Video Auxiliary Data) area:
Setting
FR
SUPER
No.
DISP.
DF
59.94Hz
NDF
Sets the DF or NDF mode for CTL and TCG.
0: Uses drop frame mode.
1: Uses non-drop frame mode.
VOUT
59.94Hz
TC_IN
Specifies how the phase is switched for the time code output by the TIME CODE OUT
connector for the external LTC input when the TC INT/EXT switch is set to EXT. (only in EE
mode)
0: Synchronized with output video signal.
1: Synchronized with the external time code input.
SBC
Specifies how to output VITC that will be superimposed on the SD output video signal.
0: Outputs the time code recorded in the SBC area as VITC
VAUX
1: Outputs the time code recorded in the VAUX area as VITC
NOTE:
VITC data detected in the input video signal is automatically recorded in the VAUX area
during video recording.
OFF
Specifies whether or not VITC data will be superimposed on HD SDI output.
ON
0: Not superimposed
1: Superimposed
OFF
Specifies whether or not LTC data will be superimposed on HD SDI output.
ON
0: Not superimposed
1: Superimposed
OFF
59.94Hz
ON
Specifies whether or not the internal time code generator value should be recorded in the
VAUX area.
0: The internal time code generator value is not recorded.
Record the time code value when it is superimposed on input video signals.
1: The internal time code generator value is recorded.
NOTE:
• When 1394 is selected as the input signal, the time code signal superimposed on the
compressed input signal is recorded regardless of settings in this menu.
• When 23.98, 24, 29.97, 59-23, 60-24, 25, 60-25 is selected in menu No. 25 (SYSTEM
FREQ), the internal time code generator value is recorded as the time code in the
VAUX area.
SBC
59.94Hz
F_RATE
Selects user bits in the LTC data output by the TIME CODE OUT and HD SDI connectors
or user bits in the SBC area (DVCPRO HD only) output via the IEEE 1394 terminal during
playback of clips in 720/24PN, 720/30PN and 720/25PN formats as well as optional AVC-
Intra 1080/24PN, 30PN and 25PN clip formats.
0: Outputs the user bits recorded in the SBC area.
1: Outputs the frame rate information recorded in the VAUX area.
This area, which is separate from video and audio data area on a P2 card, stores SMPTE/
EBU compliant time code, recording dates and other information.
An area in the video data on a P2 card that stores additional information on video data.
Settings and brief function description
only
29.97Hz
50Hz
23.98Hz
24Hz
50Hz
only
50Hz
only
29.97Hz
25Hz
only
Setup: Item Settings
171
Advertisement
Table of Contents
