Table of Contents
Advertisement
9)
Clip no.
Indicates the order clips were recorded (up to 1000
clips). The number of clips recorded in a different
format or that for some other reason cannot be played
back are indicated in red. To play back clips indicated
in red, choose [PLAY SETUP] – [PB FORMAT] to adjust
the recording format.
➝Refer to "Setting playback format (PB FORMAT)"
(page 150).
10)
Clip protect indicator
Indicates that a clip is protected.
11)
Various indicators
:
Shot mark
M
Indicates the presence of a shot mark.
57)
: Resume playback indicator
AaA
Indicates clips selected for resume playback.
:
Index
Indicates that an index has been recorded. The
unit cannot record indexes.
Selecting thumbnail display method
(THUMBNAIL SETUP)
Use the steps below to display thumbnails of the desired clip.
More detailed settings of thumbnail display are also possible.
1
Press the MODE button to switch to the AVCHD
mode.
➝Refer to "Switching to AVCHD mode" (page 144).
2
Press the MENU button.
3
Select [THUMBNAIL SETUP] and press the SET
button.
4
Press the up and down (4/5) cursor buttons to select
an item and press the SET button.
THUMBNAIL MODE:
Select the clip to display.
ALL:
(➝
page
SAME
FORMAT:
MARKER:
INDEX:
INDICATOR:
Turns indicators on and off. (The factory default is on.)
Clip protect indicator and resume playback indicator are
displayed also when indicator is set to off.
DATA DISPLAY:
Select the data that should appear in the time display of a
clip.
TC:
UB:
TIME:
DATE:
DATE TIME:
DATE FORMAT:
Select the order for indicating date and time of recording.
This setting does not affect the date of recording
displayed by the clip property.
Y-M-D:
*1
M-D-Y:
*1
D-M-Y:
*1:The default setting for the AJ-HPM200P is "M-D-Y", and
for the AJ-HPM200E is "D-M-Y".
5
Press the MENU button to return to the thumbnail
screen.
AVCHD Recording and Playback: Using an Optional AVCHD Board
Shows all clips.
Displays the clips in the same playback
format.
Displays clips with shot marks.
Displays clips with indexes.
• XX indicates factory default settings.
Time code
User bit
Shooting time
Day of shooting
Shooting date and time
• XX indicates factory default settings.
Year/month/day
Month/day/year
Day/month/year
145
Advertisement
Table of Contents
